wall socket manufacturer china is used to connect and disconnect circuits and control the on and off of lighting fixtures. In a narrow sense, electrical products usually only refer to switches and sockets in building electrical systems. So, do you all know how to dismantle wall socket manufacturer china?

The disassembly method of wall socket manufacturer china is as follows:

1. Open the wall socket manufacturer china and circuit breaker that you want to remove. This circuit breaker can control the entire room or just a specific wall.

2. Use a flat-head screwdriver to fix the junction box on the wall switch cover plate and remove the screws. Remove the cover plate and place the probe of the circuit tester on the screw terminals of each switch to ensure that there is no force to switch. Refer to the instructions of the circuit tester.

3. Use a crosshead screwdriver to unscrew the two screws of the junction box - the wire pull switch. From the junction box, you can access the switch on the side of the wire terminal screw.

4. For the switch on the upper side, loosen the terminal screw with a cross-head screwdriver and pull the wire away from the switch. Pull the switch off the wall.

5. Plastic wire caps are at each end of the wire. Electrical tape is wrapped around each cap and wire to further secure the tail cap of the wire. The east and west wires enter the junction box. A solid cover plate was placed in the junction box and fixed with screws.

wall socket manufacturer china The working principle of the socket is very simple. Nowadays, any electrical appliance we use cannot do without the support of linear power supply.

wall socket manufacturer china https://www.paiyaele.com/PC-Flame-Retardant-Panel-118A1-PC-Series-Wall-Socket.html