cnc pipe end forming machines automatic is a machine with a very wide range of applications, from a small part of a refrigerator to the bending of underground pipes. Always innovating, the new cnc pipe end forming machines automatic offers the best functionality and many features to help workers run the machine more efficiently. Operators who master the new machine control characteristics can take advantage of these features to improve efficiency. Workpiece mold specification memory: Most of the new CNCcnc pipe end forming machines automatic have a common feature.

The ability to store workpiece specifications and all relevant machining information, such as mold type, position and bending sequence. Moreover, the CNC function enables the operator to store and access the tool library, which provides convenience for the management of the tool inventory. Material thickness detection: When using a fine grinding die, changes in material thickness can be detected and real-time bending calculations can be performed, thereby reducing the number of parts with too large or insufficient bending angles. 3-D graphic display and bending simulation: As the workpiece is bent, these features show the bending process of the part on the controller screen to avoid material scrap caused by incorrect part forming.

CNC pipe end forming machines automatic Part programs can be programmed by technicians and transmitted down.

For how to operate the anticorrosive tube, we can use to bend the tube, first of all, the direction of the pipe should be levelled, so that the anticorrosive tube in the mold and the base and wedge, to achieve the process requires two handles (base control handle, wedge control handle). When the anticorrosive tube is put in place, the wedge pressure reaches 210bar.

Press the base control handle to make the main top oil cylinder rise. When it rises to a certain height, release the handle and stop for 1-2 seconds to reduce resilience. At this time, you can measure the Angle of the cold bending pipe with an Angle ruler. Release the pressure of the wedge cylinder, and then measure the bending Angle, you can find the change in the front and back Angle, due to the elasticity of the steel, but how to know the rebound rate of the steel, in general, when the bending Angle reaches 1 degree, the actual natural Angle is only 0.5 degrees.

When each cold-formed pipe starts to simmer, the first two times, the last two times and the middle one need to be measured, which can reduce the influence of various factors on the bending Angle (material). The working principle of hydraulic pressure is actually very simple: CNC hydraulic pressure is composed of oil cylinders, supports and molds.

cnc pipe end forming machines automatic https://www.john-sheng.com/Automatic-CNC-pipe-end-forming-machine-for-exhaust-pipe.html